Even after giving your truck a fresh oil change, that pesky warning light sticks around.
It might bug you, but don’t worry; it’s harmless.
Still, it’s wise to reset it for a heads-up on the next oil change.
Luckily, resetting is a breeze.
Keep reading to discover how to reset that check engine oil light warning.
Source: chevroletforum
Change Engine Oil Soon
This is a warning signal on your car’s dashboard, indicating you should check your engine oil. To do this, follow these steps:
- First of all, you need to park your car on a flat surface; uneven ground can give inaccurate oil level readings.
- After which, you need to turn off the engine and let it cool for 30 minutes to ensure accurate measurements.
- Subsequently, pop the hood and locate the plug beneath the steering wheel, then open the hood.
- Find the engine’s oil level stick, remove it, clean the tip, and reattach it.
- Remove the stick again, and observe the oil level between the two lines on it.
- If below the first line, add the specified amount of oil; if above the second line, remove the excess using appropriate tools.
- To add oil, open the cap at the top of the engine and pour in the required amount.
The above steps show you how you can handle the engine oil change light in general.
Though sometimes, it comes on because the engine oil is in bad shape. If the oil is old, it can trigger this issue.
Under your car, there’s a cap at the bottom called the oil sump cap; you should drain out the old oil from there.
Before anything else, inspect the hue of your engine oil.
As mentioned earlier, use the stick to see its color.
If the engine oil is dark, like black or brown, that’s not a good sign. It’s time to swap it out for fresh oil.
How to Reset the Change Engine Oil Soon Sign
After you change the oil, the ‘change engine oil soon’ message won’t go away on its own.
It relies on data you feed into your vehicle’s computer, like engine temperature and total revolutions.
So, to clear that warning, you must reset this info.
Follow these crucial steps to reset the ‘change engine oil soon’ sign.
- Turn on the ignition without starting the engine.
- Press down on both the accelerator and brake pedals completely.
- Hold down both pedals.
- After three seconds, a message will appear, indicating the reset is underway.
- After 25 seconds, a message will confirm the reset is finished.
- Release the accelerator and brake pedals.
- Turn off the ignition.
Frequently Asked Questions
Can I keep driving with the ‘change oil soon’ message?
Well, technically, yes, you can drive, and you can even make that message disappear by resetting it.
However, it’s not a good idea and not recommended for your car’s health.
If you see this message, it’s better to play it safe and go for an engine oil change.
How do you remove the ‘ change engine oil soon’ message?
Start your car with the key, go to the DIC menu, locate the remaining motor oil life option, and reset it to 100%.
However, it’s not advised to do this.